申し訳ありません。在庫を切らしております

 

他のお客様は代わりにこんな商品を買っています

Crank Brothers Egg Beater 3 Pedals

JPY
 

The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal.

The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC, trail riding and cyclo cross.

Features:

  • Cleat: Premium brass cleats included
  • Shims: Included
  • Release Angle: 15° to 20°
  • Warranty: 5 years
  • Weight: 278g per pair
  • Spindle: Forged scm435 chromoly steel
  • Body: cast stainless steel
  • Wings: cast stainless steel
  • Spring: 300 series stainless steel
  • Inner bearing: Needle
  • Outer bearing: Cartridge
  • Maximum rider weight: No restrictions
  • Colours options: Silver/Blue or Silver/Red

You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).

You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals.

As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.

ラインアップ:
  • Egg Beater
服のしつけ:
  • MTB
ブランド:
  • Crank Brothers

配送はどのぐらいかかりますか。

注文するときアイテムの在庫状況を確認してください。このアイテムは:

アイテムが急送されたことをどう知りますか。

アイテムの急送を確認するメールを送ります。

私のアカウントで ご注文の状態や個別なアイテムの状態が確認できます。

配送の遅延を知らせる前にご注文の急送から15営業日を許してください。

アイテムは届けていない場合、お隣人が小包を預かっているか確認したらいいです。または現地の郵便仕分けデポーか配送デポーに問い合わせて、小包がそちらにお拾いを待っていることを確認したらいいです。

アイテムに満足しない場合

返品ポリシーは こちら

お客様からの口コミ評価

現在は口コミがありません

レビューを書くと、14,000円もらえるチャンスです!